sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Unattended call forward / transfer to muliple lines

I am looking for a phone system with 2 lines input. It should
be capable to transfer / forward (unattended) one in coming call to any of
atleast 10 programable telephone numbers using the second telephone line
connected to that phone. Incoming caller should be able to select from
option 1 to 10 to dial any of the ten programed numbers. Telephone dials the
selected number using the second line and connected both lines once dialing
is completed. Any help in this regards ?
thanx

sounds like all that could be done with one centrex line and the ulitmate call handler and no phone system at all! with centrex there is no line
loss like when you bridge two c.o. lines together!

CWC.. Thanks for input.. The real issue is , I don't have Centrex service available at the location where I want to use this system. That is the biggest reason, I would like to use two simple analog lines and to make centrex service by my self.
Any thoughts ?

a tda 50 or ta 848 and tva 50 with a remote modem
or lan card for remote programing

CWC.. Thanks.. I am looking for a less expensive solution.. Any other suggestion
TVA and TDA systems are completes systems with many capabilities. I am looking for a specific function only.. Any idea ?
Any system other than Panasonic may also be ok if it accomplish above function .
MMM

full expanded td 816-3 or the higher rev the better or above a disa card or tvs 50 now thinking you could dial in via the tvs to change call fwd variable on xdp jacks or a built-in modem
to dial in and add on conference chip for enhanced
echo cancellation all secondary market stuff now