sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Make 2 incoming line ring.

Hi guys,
My questions is simple. I want to know if is possible make a second incaming call ring at the same station instead of only blink???
If anybody can help with that it will be great!
Thank you!!!
Jeff silva

Yes, you can activate the system call waiting.
What system do you have? This post may help you also.
https://www.sundance-communications.com/forum/ultimatebb.php?/ubb/get_topic/f/9/t/001101.html
MrG

Yep, thank you. I do have 1232 system. So Do i Have to use progam 99 to make the system ring when is off-hook??
thank you!!!
jeff silva

As Brokeda stated in the above link:
" Kxtd does ring off hook phones if call waiting is enabled, takes about 3-6 seconds to start depending on revision, and works best with call waiting tone 2 selected.
Program 99 5 2 AutoDial/Store. selects cw tone 2.
Intercom 7311 turns on Call Waiting, which is actually Subdued Off Hook Ringing.
MrG

intercom 7312 enables call waiting tone 2

intercom 7312 activates OFF HOOK CALL ANNOUNCE on intercom and off hook ringing on CO calls, on
7436 and 7235 phones.
intercom 7313 activates WHISPER PAGE for Intercom and off hook ringing for CO calls, on any 74xx phone.
intercom 7311 activates OFF HOOK RINGING on intercom and CO calls, on any PT phone.
intercom 7310 cancels any of the above.
co calls will ring subdued if any of the above are activated.
Call Waiting tone 2 (as in PGM 99 5 2) simply makes the phone ring special cadence and a little faster when off hook.

This is Great, thank you very much, I will be at my customer on thursday morning!!!!
Thank you again!
Jeff Silva