|
Joined: Jun 2006
Posts: 5
Member
|
OP
Member
Joined: Jun 2006
Posts: 5 |
I'm not very experienced with Panasonics, so forgive the simplicity of this post. I installed a KX-TA824 last week, and the VM card came in earlier in the week. I was hoping there would have been programming instructions with the card (which features need to be set how), but that was not the case. After installing the card, I tried to initialize the card, but it wouldn't initialize. I called Panasonic tech support (after being on hold for 45 min ), and they said the card is bad. So since I was granted a few days, does anyone know what features I need to set in order to get this card to work? Thanks a bunch!!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2006
Posts: 2,039
Member
|
Member
Joined: Apr 2006
Posts: 2,039 |
This link may help you. https://www.voiceprocessor.info/ Do you have the manuals for the 824?
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
MJRoberts, What did you buy, the KX-TA82492 card? The TA824 should have came with 4 books and a CD. Feature manual, operating manual, installation manual and programming manual. The Windows based is on the CD and is actually very nice. Do you have any of these? Can we assume that you have the programming software installed and have connected to the TA824 as you said you tried initializing it? Or did you try using program field 808 through the Admin set, 101? I would power it down, pull the card and check the pins and see if it smells burnt , if t seems OK reseat it and try again. Everything in the manual is under BV. MrG
|
|
|
|
Joined: Jun 2006
Posts: 5
Member
|
OP
Member
Joined: Jun 2006
Posts: 5 |
The 4 books were there, and I did all programming via the PT at jack 01. What was strange is when I first installed the card and itialized it, it initialized fine, but then the system couldn't see the card. The link that Texas Technician gave me looks like it gave some good answers.
Are there any actual programming of mailboxes that needs to be done, or does it do it automatically?
|
|
|
|
Joined: Oct 2005
Posts: 1,078
Member
|
Member
Joined: Oct 2005
Posts: 1,078 |
load and use the software you'll be glad you did..
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
113
guests, and
340
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|