sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems making isdn on d1232 be answered by voicemail

I have a TD1232 with 6 isdn channels and 100 number indial. How can I make the number 500 ring at the tvp100 voicemail when the caller rings 500. 500 is not a physical phone. All the other phone extn ring OK from outside when rung.
I have setup a hunt group 1 as 500 in 813 I have put the voicemail extns in the 131 and done 106 also
This was working but they have changed from PSTN to ISDN. I have them all ringing on phones at the moment.

thanks in advance for any help

Under T1/PRI settings you set up a reference CO, default is 9.
Use DID settings to send numbers to phones or VM immediatly, and main number to ring group day. Use line 9 to have VM answer main channels on an intercept basis.
Did Table==Day main number goes to 500
DID table--Nite main number goes to VM DN
Day- Trunk Group Intercept- Line 9's TG intercept to
VM DN.

I ended up making all calls ring to an analgoue extn and fwd this to voicemail with no voicemail box.I got the general message which worked fine. The only thing is the calls then had to go to a group of extns which wanted voicemail to work on fwd busy/no ans. So I ended up making phones ring immediately.