|
|
|
|
Joined: Jan 2002
Posts: 42
Member
|
|
Member
Joined: Jan 2002
Posts: 42 |
just replaced an old panasonic EASA wih an 824 configured 3 x16 and programmed other buttons to be speed dials for extensions. however buttons marked co 8 and 9 light up when incoming call rings on line 1 or 2. ( 3 is not in use, but left it active for posible future use.. I have them prorgammed to be icm 108 and 117 and it occurs even if I unplug the jacks on the ksu.
thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
Check those buttons at the phones and see what they are programmed for.
Just press program, press the button, (co 8 or 9)
and see what it shows.
You will need a display set.
MrG
|
|
|
|
|
Joined: Jan 2002
Posts: 42
Member
|
|
Member
Joined: Jan 2002
Posts: 42 |
i have them programmed for icm 107 and icm 118.on all 10 phones but even if I unplug at the ksu it remains the same. I have not unprogrammed each extension yet...
|
|
|
|
|
Joined: Jan 2007
Posts: 1,026
Member
|
|
Member
Joined: Jan 2007
Posts: 1,026 |
Are those extensions programmed to ring on incoming calls? It sounds as though you're getting the DSS appearance and ringing indication, even though they are unplugged.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
What kevhawk13 said. John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,494
Posts639,868
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (BobRobert, justbill),
135
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
