|
|
|
|
Joined: Jul 2007
Posts: 388
Member
|
OP
Member
Joined: Jul 2007
Posts: 388 |
Seven of the eight extension ports are being used, extension 1 failed the other day. I took the extension from 1 and moved to the open 8 extension. I can get a dial tone but trying to dial gives me tones and then the dial tone but no connection, I have only one display phone and the rest have no display. Question: is there any programming method to copy the extension programming from the extension 1 port to the extension 8 port.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
Only through the laptop with use of the programming software.
Have you tried a good set with a new linecord at the control for station 1?
I always suspect cabling 1st.
Also temp. move the display set to port 8 and maybe it will give you some indication as to whats going on.
It could be all in programming for that station
MrG
|
|
|
|
Forums84
Topics94,296
Posts638,851
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
