Adding polycom to kxtd 1232

Print Thread

Rate Thread

Adding polycom to kxtd 1232 #162781 08/22/08 02:50 PM
Joined: Nov 2003 Posts: 480 houston tx cctech Member
cctech Member Joined: Nov 2003 Posts: 480 houston tx	Hi again Am i correct in thinking that to add a polycom conference phone to a td1232 all I need to do is use the first pair on a station port program it as xdp enabled and turn off the ringing. Is there anything else that I should be aware of. Thanks

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Adding polycom to kxtd 1232 #162782 08/22/08 05:34 PM
Joined: Jan 2007 Posts: 1,217 Los Angeles 94astro Member
94astro Member Joined: Jan 2007 Posts: 1,217 Los Angeles	That's about it, just don't forget to plug it in. Aaron

Re: Adding polycom to kxtd 1232 #162783 08/22/08 05:55 PM
Joined: Dec 2007 Posts: 125 yorba linda , ca allcalcomm Member
allcalcomm Member Joined: Dec 2007 Posts: 125 yorba linda , ca	that about covers it, I've also kept a system phone on it for easyer access to system features and use of the display screen , in that case you don't enable the xdp ( ringer on is intercom 391 and 390 for off )you can use the xdp port on a phone in either case .

Re: Adding polycom to kxtd 1232 #162784 08/23/08 03:16 AM
Joined: Nov 2003 Posts: 480 houston tx cctech Member
cctech Member Joined: Nov 2003 Posts: 480 houston tx	Thanks guys, I just wanted to be sure that there wasn't something else that I should be aware of.

Re: Adding polycom to kxtd 1232 #162785 08/23/08 07:32 AM
Joined: Aug 2008 Posts: 5 ohio zalex Member
zalex Member Joined: Aug 2008 Posts: 5 ohio	KX-TD816 Caller ID Problem: I have 1 PSTN, 1 VoIP and now 1 T-Mobile line. PSTN and VoIP pass Caller ID perfect. T-Mobile is sending Caller ID (Tested directly from router to CID basic phone), but it is not displaying. Only says C001. They said their CID signal is 400MS. Any suggestions? Thanks

Re: Adding polycom to kxtd 1232 #162786 08/23/08 07:51 AM
Joined: Jan 2007 Posts: 2,125 Likes: 4 Kilkenny Ireland OBT Admin
OBT Admin Joined: Jan 2007 Posts: 2,125 Likes: 4 Kilkenny Ireland	Zalex, start a new thread,get better results. press new post on top of page. check caller id enabled for co 1 “I have not failed. I've just found 10,000 ways that won't work.”

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Adding polycom to kxtd 1232