web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#163039 10/18/08 04:45 AM
Joined: Oct 2008
Posts: 5
Member
OP Offline
Member
Joined: Oct 2008
Posts: 5
I have a KX-T7880 (connected to a KX-TD1232) that has worked fine for several years. Now when I power it on and press talk, it beeps twice. Then if I dial just about anything, the main phone extension on the system rings. Ditto if I just press a button for an outside line and press any number button.

The battery is fine. Any other suggestions on how I can debug or repair?

thanks...Mike

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2007
Posts: 2,116
Likes: 2
OBT Offline
Admin
*****
Offline
Admin
*****
Joined: Jan 2007
Posts: 2,116
Likes: 2
check if the 0 button is stuck down, could cause it to dial 0 every time a number is dialed


“I have not failed. I've just found 10,000 ways that won't work.”
Joined: Oct 2008
Posts: 5
Member
OP Offline
Member
Joined: Oct 2008
Posts: 5
Nope, that's not it - none of the keys appear to be stuck.

Joined: Oct 2001
Posts: 4,043
Member
Offline
Member
Joined: Oct 2001
Posts: 4,043
Mike, check the base and make sure it's not set in SLT mode.
Also, you may want to put a pits set, (system phone) on that port and see if there are any problems with the port or system programming for that port. An analog display set would be best if you have one.
-----------------
MrG

Joined: Jan 2007
Posts: 2,116
Likes: 2
OBT Offline
Admin
*****
Offline
Admin
*****
Joined: Jan 2007
Posts: 2,116
Likes: 2
MrG, I though it might be the 0 stuck down as I had a key set the other day with that problem
But you are right it must be some thing like a hot line set up by mistake
Mike try dialing 790 on the cordless straight away it should reset the extension


“I have not failed. I've just found 10,000 ways that won't work.”
Joined: Oct 2008
Posts: 5
Member
OP Offline
Member
Joined: Oct 2008
Posts: 5
Thanks for all the suggestions. I did try swapping the portable phone with another analog set. The problem followed the phone, not the port.

Another clue: when I dial the extension of the portable phone, it does ring, but when I answer it, I get a loud tone.

Any other suggestions? Is my phone set busted?

Joined: Jan 2007
Posts: 1,026
Member
Offline
Member
Joined: Jan 2007
Posts: 1,026
Did you try swapping it with a digital set? Check the display like Mr.G suggested.


Moderated by  Carl Navarro, OBT 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
1 members (justbill), 208 guests, and 238 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5