|
|
|
|
Joined: Sep 2007
Posts: 16
Member
|
|
Member
Joined: Sep 2007
Posts: 16 |
Currently we have a TDA50 at a remote site linked to a TDA200 via the ip gateway cards. 3 digit dialing works great however we would like to simplify accessing an outside line. The 50 has no local co's connected to it. The users pick up their handsets then dial 8029 to grab a line from the 200. Can this be simplified. Keep in mind there are only 2 digital sets at the remote site, all others are analog.
Thanks,
Jason
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 2,126 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,126 Likes: 4 |
try 79, 7 should pick up tie line instead of 802 which must be the group the gateway card is set up on
if you have no lines on the tda 50, you should be able to remove 9 from dial plan on the tda 50 and set it up as number on other pbx ext then in network tie table, 9, must be set on gateway card already if 8029 is working.
you should them be able to dial 9 for line on the 200
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Forums84
Topics94,562
Posts640,154
Members49,867
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
35
guests, and
110
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
