|
|
|
|
Joined: Nov 2005
Posts: 28
Member
|
|
Member
Joined: Nov 2005
Posts: 28 |
I have a 616 with 2 connected door phones, and when someone presses the call button the programmed phones ring like they are supposed to. However, they never stop ringing! By default they are supposed to ring for 30 seconds and stop if no one answers, but these ring forever.
Is this a programmable feature? Which part of the system controls this - KSU, door phone module? I think I have a bad part, but don't know which one to replace.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2004
Posts: 324
Member
|
|
Member
Joined: May 2004
Posts: 324 |
easy remove the door intercom and short the wires togetheruntil the system rings then open again . the system will for the programmed time if so its the intercom. if not then its the interface card/module.there is no programming to set for constant ringing so if it is happening on both door intercoms i would think it is the interface peter ( www.vpi.ie )
|
|
|
|
|
Joined: Nov 2005
Posts: 28
Member
|
|
Member
Joined: Nov 2005
Posts: 28 |
Okay, I'll give that a shot, thanks for the tip.
|
|
|
|
Forums84
Topics94,513
Posts639,937
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
360
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
