|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
Well, I'm posting this only because I said I'd look in to this request by one of my clients. They are trying to cut costs opening a new restaraunt, so when they ordered DirectTV they ordered the regular non-HDTV converters. Their problem is there is only one HDMI cable run to the wall mounted TV from the DirectTV converter.
So now they want me to try to make the analog RCA video run over the HDMI Cabe.
Any thoughts on this one?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
well, I never tried this but their are 19 conductors in an HDMI cable you may be able to cut the ends off the cable and uses some of those conductors.
If it were me I would run new cables
I Swear I did not touch anything 
|
|
|
|
|
Joined: Feb 2005
Posts: 12,359 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,359 Likes: 4 |
I never cut open an HDMI cable so I couldn't say. My opinion is it was real stupid to install that cable without provisions being made to pull it out or install new ones.
What's wrong with exchanging the receivers for the HD ones? Look at it this way, what's cheaper, installing new cable or the difference in cost between the two types of receivers.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
If you try anthonys suggestion, i would probably buy hdmi extenders and cut the ends off of those; that way in the future you have a cable that can be used. However, i would seriously run a piece of coax if possible, anyway you look at its time consumption and as hal states, it will be cheaper to replace the receiver than geri-rig some adapter.
|
|
|
|
|
Joined: Jun 2007
Posts: 2,106
Member
|
|
Member
Joined: Jun 2007
Posts: 2,106 |
I'd vote for video baluns and running some Cat5. If that's still too expensive for them then you need new clients.
|
|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
Originally posted by rustynails:
If you try anthonys suggestion, i would probably buy hdmi extenders and cut the ends off of those; that way in the future you have a cable that can be used. However, i would seriously run a piece of coax if possible, anyway you look at its time consumption and as hal states, it will be cheaper to replace the receiver than geri-rig some adapter. That's a really good Idea at least if it does not work your only out a few bucks
I Swear I did not touch anything
|
|
|
|
|
Joined: Jun 2007
Posts: 356
Member
|
|
Member
Joined: Jun 2007
Posts: 356 |
Big Lots has HDMI cables for around $10
it's all tip and ring
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Christian Center),
22
guests, and
77
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
