|
|
|
|
Joined: Jun 2005
Posts: 114
Member
|
|
Member
Joined: Jun 2005
Posts: 114 |
Was asked this by the administration of the university where I work...
The feature manual doesn't make this clear...
[This is from the manual:]
"Calling Line Identification Presentation (CLIP):
The PBX can send a preprogrammed telephone number to the network when an extension user makes a call.
The called party can see the number on his telephone display before answering the call.
[and a related feature]
Connected Line Identification Presentation (COLP):
The PBX sends a preprogrammed telephone number to the network when the extension user answers an
incoming call. The caller can see the number of the answering party on his telephone display when the call is answered.
[My question:]
Will this pre-programmed number display
on standard Telco Caller ID?
Or does the called phone have to be special
(e.g. ISDN phone connected through PRI, etc.)
Thanks,
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
your system would have to have ISDN, if it does then it will show on any caller id unit
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
You need PRI or SIP trunks for this feature to work.
You can set each port to send outgoing CID of your choice.
|
|
|
|
Forums84
Topics94,542
Posts640,065
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
160
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
