|
|
Joined: Sep 2011
Posts: 18
Member
|
OP
Member
Joined: Sep 2011
Posts: 18 |
By default the TDA50 puts a call on hold when you press the flash on a SLT.
It is possilbe to program the TDA50 to pass the flash signal onto the telco in order to pick up a call waiting on a SLT?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
look under efa settings on your slts you may have to enable it try a flash and a *60 for c.o. EFA flash if not try just *60
|
|
|
|
|
Joined: Sep 2011
Posts: 18
Member
|
|
OP
Member
Joined: Sep 2011
Posts: 18 |
Thank you, that did the trick.
I was hoping to be able to just press the flash rather than "flash *60". Do you know if that's possible?
|
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
no but what I would do is swap codes 4 and 28(doubt you are using tie lines on your G)
1 for 1 then when a call comes in its flash 7 to
pick up co call waiting
|
|
|
|
|
Joined: Sep 2011
Posts: 18
Member
|
|
OP
Member
Joined: Sep 2011
Posts: 18 |
Not using a tie line. I'll give that a try. Thanks again.
|
|
|
|
Forums84
Topics93,969
Posts637,422
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
