|
|
|
|
Joined: Jan 2007
Posts: 42
Member
|
|
Member
Joined: Jan 2007
Posts: 42 |
Can the tda-100 be set up as a key system not a pbx mode- also the caller id card was installed but no caller id showing up - yes it is set up tru the telco lines but do you turn it on or off in the co settings of the switch?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
You can program it any way you want.
If you have 12 lines just put all 12 lines on all sets and it's a square Key System.
CID must be turned on in the card settings with console.
|
|
|
|
|
Joined: Jan 2007
Posts: 42
Member
|
|
Member
Joined: Jan 2007
Posts: 42 |
Thank you, the help is appreciated.
the cid is found in the line setting?
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
Go to CONFIGURATION/SLOT, Place pointer over the CO card in question, right click and select Card properties. Card option will tell if it sees the CID daughter board. The other CID stuff is usually default to on, is under that.
|
|
|
|
|
Joined: Jan 2007
Posts: 42
Member
|
|
Member
Joined: Jan 2007
Posts: 42 |
thank you I will check next time I am by the their office
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
167
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
