sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Handsets Compatibility

Hi Guys

Can anyone tell me if the following handsets can be used on a KX-TDA30

KX-T7735
KX-T7750
KX-T7130E

I have a customer that has an old KX-TA 624 with these handsets on, aprox bout 20.

And wants to move to ISDN lines, but dosent want to change all the handsets.

Can find anywhere on the net that gives me a compatibility list of what handsets can be used on which system.

I know the above handsets are analogue, but will the digital features, eg blf, cli etc work when used on an SLT extension card ?

Or does it have to be a hybrid port ?

Thanks
Adam

He could use 4 of them on the hybrid ports using both slt and digital ports the rest will have to be kxt 76xx or dt3xx phones
I would say change all phones for the sake of 4 units


Do you have the tda 30 already as this system has came to end of life a month or Two ago

An SLT extension card is for Single Line Telephones. None of these phones will work on an SLT card.
The phones you reference 7735 and 7750 are Analogue Proprietary Telephone sets that require 1 pair from a HLC4 PLC4 0r PLC8. The 7130 is an analog key set that requires both the digital and analogue port from an HLC card.. If the 30 is like the TDA50, you can have a certain amount of Analogue Proprietary Telephones OR DPT's based on the number of power supply's.
The PHONES you referenced will work with a TDA 50
max 4 with 1 power supply, max 24 with 2 power supply. 30 look in the manual.
All features will work, except the display on the 7735 may not work exactly in accordance with the user guide, this phone was made for the 824.
The numbers you reference are for Panasonic telephones, comprised of a Base unit and a HANDSET, which is the part you talk into( :dance: :dance: :banana: )

Brokeda, all the phones he said are analog key sets and require to connect to the dhlc card and use 2 pairs(the digital and slt) which comes on the tda30, but you can only have 1 of these cards

Yes the 77xx are APT phones and do use 2 pair.
My bad. They can connect to HLC4 or PLC4 or PLC8


The 50 can have a PLC8 card in slot 5,6,7.

71xx only can connect to HLC4. Max numbers on the 50 refer to APT or DPT.
What is the capacity of the 30???
No plc cards?

You get 1 dhlc 4 port on board on the 30 that's it, the other cards are slt or digital only

Bummer

The 15 and 30 are gone here now. Ncp has taken over