How to Remove RF from 816 system.

Print Thread

Rate Thread

How to Remove RF from 816 system. #172587 02/08/05 05:00 AM
Joined: Jan 2005 Posts: 16 Hickory rustytee Member
rustytee Member Joined: Jan 2005 Posts: 16 Hickory	Hey, The RF seems to be coming from the Curly Cord on every phone, I do not have it on the speaker phone. I have put some of Mike Sandmans RF eliminators on and it still does not seam to fix the problem. Rusty

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: How to Remove RF from 816 system. #172588 02/08/05 05:16 AM
Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576) dtmf RIP Admin
dtmf RIP Admin Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576)	Have you tried puting them on the line cords? What system are we talking about? Analog,digital what release? Russ runs a local service and private tech center. [/url]

Re: How to Remove RF from 816 system. #172589 02/08/05 05:19 AM
Joined: Jan 2005 Posts: 16 Hickory rustytee Member
rustytee Member Joined: Jan 2005 Posts: 16 Hickory	We are talking about an 816 Analog system, I also have rf filters on the line cords. Rusty

Re: How to Remove RF from 816 system. #172590 02/08/05 05:27 AM
Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576) dtmf RIP Admin
dtmf RIP Admin Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576)	It sounds like you have tried everything but replacing your cable with shielded, there used to be a ferret that you put in on the jacks between the first pair but I don't recall what they where, use to get them at radio shack and they works good. Russ runs a local service and private tech center. [/url]

Re: How to Remove RF from 816 system. #172591 02/08/05 10:26 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	Check your wiring 1st. I've gotten a wacky noice on the handset and the speaker is good. Rember the Blue pair is reversed with the Green pair. The spreaker works off it's own piar. Exspecially if it works fine by the ksu with the mounting cord. Need Tech Support on any Telrad system

Re: How to Remove RF from 816 system. #172592 02/09/05 01:25 AM
Joined: Aug 2002 Posts: 4,934 Likes: 1 Lakeland,Florida,USA SSPhone Administrator
SSPhone Administrator Joined: Aug 2002 Posts: 4,934 Likes: 1 Lakeland,Florida,USA	Rusty This is a known problem with the 816 and 2464 V02 mainly on the feature sets. Telrad had a soulder in filter in those days and there was a different eprom chip that could be replaced. Here in FL any system within 10 miles of a radio station had free MOH whether they liked it or not. Telrad doesnt support the analog equipment anymore and I dont think you will find that chipset or the filters. Sorry Telrad Digital Programmer Kits Toshiba Voicemail Network Programmer Kits TeamViewer Remote Support BUY Remote Support

Re: How to Remove RF from 816 system. #172593 02/16/05 10:14 AM
Joined: Feb 2005 Posts: 274 DENVER, CO USA telephonegunner Member
telephonegunner Member Joined: Feb 2005 Posts: 274 DENVER, CO USA	I still have the tech bulliten that shows how to solder in the filter to eliminate RFI for these type of phones, if your interested. ------------------ TG TG

Moderated by SSPhone

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Other TDM Phone Systems Telrad Telephones & Systems How to Remove RF from 816 system.