sundance-communications.com Forums More-Phone & VoIP Systems Telrad Telephones & Systems appgen callforward to speed dial

Hey folks! I got the appgen working and did all the programming as mentioned in my other thread. When I call the phanton extension directly (internal)that I programmed it forwards correctly. When Appgen routes the call from the IVM I get 'that extension is not available'. Do I have to physically call forward a real ONS port rather than using a phantom ULD port?

Thanks

jrg

I got it going by using the old method of call forwarding a ons port.

It is good to go.

glad you got it going but now you used a ons port. are you using emanager to program the system?

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

Congratulations on getting it working.

You can still use the ULD port if you run out of slt ports. Just plug up a phone to the ext and set the Call Forward All (FEAT 352)while the phone is live, and then remove the phone from the port.Then set opt 6 to unscreened in AppGen. Just a thought.

[This message has been edited by Telradmaniac (edited March 16, 2005).]