|
|
|
|
Joined: Mar 2005
Posts: 3
Member
|
|
Member
Joined: Mar 2005
Posts: 3 |
Hi
I'm experimenting with asterisk IP PBX. I have plugged in an old ISDN
modem card, and used it to interconnect through an S0 channel with an
existing ISDN line. That worked (in both directions).
Now I wanted to interconnect with our existing PBX (telrad digital key IS 128) through
one of it's S0 channels (client site, don't know if that makes a
difference).
I can dial from the existing PBX to an asterisk extention,
communication works fine. But if I try the oposite, dialing from
asterisk to existing PBX, the phone rings (the phone on the telrad
pbx), the user picks his phone up but asterisks doesn't see that,
instead I get a busy message in asterisk. (
Dialing out from asterisk through telrax PBX to external numbers (via PRI line) works
fine
anybody an idea? Can I view logs somewhere? Somebody gave me a tip about bearer type, but that didn't bring me any closer
thx in advance
Arne
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 32
Member
|
|
Member
Joined: Sep 2004
Posts: 32 |
Arne,
Tell me again what you're trying to do? Are you setting up a connection via an ETSI BRS port? Explain the kit at each end of the link and what you are trying to achieve. Andy
|
|
|
|
Forums84
Topics94,570
Posts640,205
Members49,872
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
36
guests, and
68
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
