|
|
|
|
Joined: May 2008
Posts: 2
Member
|
OP
Member
Joined: May 2008
Posts: 2 |
Setting up a TVSe card in our existing Telrad System here S/W Version is 3.13
We have the card installed and configured on this side of the LAN - There is also an IP phone which is configured to connect through to the Internal IP of the TVSe card - which at the moment for test purposes is working fine because both the card and the phone are all on the same LAN- Our goal here is to have Telrad IP phones in our remote offices - (there are 3 in total )
My question is, can the VOIP traffic be routed through our firewall on port 5060 to the internal IP of the TVSE card or does the card itself require a dedicated Static Public IP address to correctly route the traffic?
If the phones are installed on remote sites then I am assuming that the Gateway address on the IP phone will be the Public IP address at our end - we can then set the configuration of the phones at the local level to be DHCP. We have been told that we cannot route the traffic - this to us means putting in another DSL line with a static IP address - this isn't a viable option for us at present.
Hope I have been clear in the questions.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
You need to contact a moderator to help you with this inquire. This is above the normal tech support question. Anyone of us could help you out.
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
132
guests, and
349
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
