|
|
Joined: Jan 2011
Posts: 47
Member
|
OP
Member
Joined: Jan 2011
Posts: 47 |
Hey guys. My voicemail and auto attendant shut down this morning. I am not sure where to look for the version, but I believe is was current two years ago. I have routed our calls to go directly to the ring groups instead of the auto attendant, so we are back to answering calls but even after a IPEX restart, the voicemail has not come back up. I dumped the logs and didn't see anything until I looked into the reset (the last group of logs in the console) logs. Here is what I saw: MSG 33 DIAGNOSTIC LINK UP 1 1
02:03 JAN 6,2012
MSG 74 DIAGNOSTIC IVM APPL UP 1 1
02:03 JAN 6,2012
02:03 JAN 6,2012
MSG 83 DIAGNOSTIC APPL ON INCONSIST 1 1
02:03 JAN 6,2012
MSG 72 DIAGNOSTIC DBN APPL UP 1 1
02:03 JAN 6,2012
MSG 83 DIAGNOSTIC APPL ON INCONSIST 1 1
02:03 JAN 6,2012
MSG 14 DIAGNOSTIC STATION OFF 1 3 28
02:09 JAN 6,2012
MSG 13 DIAGNOSTIC STATION ON 1 3 28
02:09 JAN 6,2012
MSG 85 DIAGNOSTIC PC LINK DOWN 1 1
07:13 JAN 6,2012
MSG 75 DIAGNOSTIC IVM APPL DOWN 1 1
07:13 JAN 6,2012
MSG 73 DIAGNOSTIC DBN APPL DOWN 1 1
07:13 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 41 13 27 4 3h 7h 3h 0h 02:01 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 41 5 14 8 1h 19h 19h 0h 1h 0h 0h 0h 07:13 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 41 13 27 4 3h 7h 3h 0h 07:13 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 13 ERR HSCXDRV_I 09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 13 sr_Common(): 09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 13 Invalid recei 09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 13 ved frame, rf 09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 13 ifo_status=E0 09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
MSG (DEC) = 23 21 8 1
09:49 JAN 6,2012
*** SOFTWARE ALARM MSG ***
FIRMWARE - MCU SOFTWARE ERROR
MSG (DEC) = 21 0 0 7 0h 0h 7h 0h 15h 49h 87h 09:59 JAN 6,2012
We have made no changes to the system and the last time the system was restarted or touched was in October when we moved it to our new location. Below is some Emagen info that I have on file. I should have all license information as well because I followed some steps on here last time we had an issue and backed that info up. System was rebooted at 10:30am eastern or so, but no diagnostic info was given past 9:49am which is consistent when the auto attendant went down. Logs were pulled around 10:50am. Voicemail extention is 44 and it is a busy signal when called internally. Auto attendant does not answer the phone, it just rings forever.
Emagen Quick Glance License Info
Licensed In Use
-----------------------------------------------
Serial Number 204xxx
Number Of Mailboxes Unlimited 46
Voice Ports 4
Fax Ports 0
Email Clients 5 1
Call Control Clients 5 1
Serial Integration On
IVR Off
TTS Sessions 0
SR Sessions 0
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2005
Posts: 274
Member
|
|
Member
Joined: Feb 2005
Posts: 274 |
Put a keyboard and monitor to the IPEX. Might give you an indication of the problem.
TG
|
|
|
|
|
Joined: Jan 2011
Posts: 47
Member
|
|
OP
Member
Joined: Jan 2011
Posts: 47 |
Thanks for the quick reply. I hooked a monitor to the IPEX but there was nothing on the screen, maybe there is a screensaver active, so I need a keyboard hooked up too.
I'll have to run back over to find out.
SSH, WEB, and telnet are not running either for it.
No Emagen version is reported in the maintenance console window.
I'll let you know what I find on the monitor.
|
|
|
|
|
Joined: Feb 2005
Posts: 274
Member
|
|
Member
Joined: Feb 2005
Posts: 274 |
Reset for the vm is recessed below the keyboard connector. Once you monitor is set up try pushing that to see what happens during reboot.
TG
|
|
|
|
|
Joined: Jan 2011
Posts: 47
Member
|
|
OP
Member
Joined: Jan 2011
Posts: 47 |
Thanks for the tip about the keyboard, that brought the screen to life. No need to restart, the hard drive is going bad. ext3-fs errors.
Backup procedure? do I just need to back up the database to move over or is there more to it?
If I have a IPEX sitting on the shelf, can I have two installed in the same cabinet?
|
|
|
|
|
Joined: Aug 2002
Posts: 4,925 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,925 Likes: 1 |
Replyed to your email
No you cant have 2 IPeX's in the same system. Also the hard drives need to stay with the IPeX that were on or you will loose your license.
|
|
|
|
|
Joined: Jan 2011
Posts: 47
Member
|
|
OP
Member
Joined: Jan 2011
Posts: 47 |
After a restart, it's stuck on the bootup screen to linux. I could probably get to the file level of the drive and get things off of it, but
Voicemails are not a bigdeal to loose, so I don't mind starting over fresh with that. We did have a menu prompt and AA that will be a bit of a heartfelt loss because it was about 7 years out of date.
Is the IPEx as simple as the TVSE to replace?
|
|
|
|
|
Joined: Aug 2002
Posts: 4,925 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,925 Likes: 1 |
There are fixes to get the crupt file repaired.
|
|
|
|
|
Joined: Aug 2002
Posts: 4,925 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,925 Likes: 1 |
All fixed 
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
112
guests, and
406
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}