|
|
Joined: May 2004
Posts: 4
Member
|
OP
Member
Joined: May 2004
Posts: 4 |
We have a fax system that is conected to a ISDN port on the PBX. When an incomming call comes the FAX card picks up the Extention number of the port as the DID insted of the DDI number dialed. Is there any way to set it so it sends the external DDI to the ISDN port?
Thanks in advance
Phil
|
|
|
|
|
Joined: Aug 2002
Posts: 4,919 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,919 Likes: 1 |
try going into name programming since this is a slt port you will need to do it from port 000. ( mode 70 then int #621 page dial the DN of the slt port page use digit 1 to erase anything in the name field and spkr. we had to do this to get ACT to screen pop with TCPip.
When your done do mode 71 to turn your soft keys back on.
|
|
|
|
|
Joined: May 2004
Posts: 4
Member
|
|
OP
Member
Joined: May 2004
Posts: 4 |
I managed to name the phone I was using but can't seam to select the extention the BRI FAX card is linked to.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Did you press the Page softkey after dialing #621?
|
|
|
|
|
Joined: May 2004
Posts: 4
Member
|
|
OP
Member
Joined: May 2004
Posts: 4 |
Yes and it didn't seem to do anything, but I will have a try again today.
|
|
|
|
Forums84
Topics93,877
Posts636,986
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}
