|
Joined: Jan 2005
Posts: 19
Member
|
OP
Member
Joined: Jan 2005
Posts: 19 |
Our DK280 has 7 cabinents. We have 2 uninstalled RCOU1A/w ECOS1A CO cards. These, I know, have to be installed after any current ones to keep the ripple effect away. Our last CO card is in cabinent V S1,With Slots 7 & 8 free there. Cab VI has Slot 2 free, and Cab 7 has Slots 3 through 8 free.
Two questions: 1) Can these be installed without cycling power or powering down. I know prog 3 needs input plus all the other ones when CO lines are plugged in. 2) Cab\n these go in cab 5 or 6 or would it be best to use cab 7?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
What software level? I would use Cabinet 6, Slot 2. You have to tell Program 03 where the card(s) are, Code 17. Then, yes, you have to cycle the power or run Prog.91-2. All other programming should be able to be completed without a reset.
The best thing to do is to complete all the programming related to those lines and the cycle the power, then you're covered.
D
|
|
|
|
Joined: Jan 2005
Posts: 19
Member
|
OP
Member
Joined: Jan 2005
Posts: 19 |
I have TWO of the double cars to insert, so would one go in 6-2 and the other in 7-3?
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
131
guests, and
431
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|