|
|
|
|
Joined: Jan 2005
Posts: 9
Member
|
|
Member
Joined: Jan 2005
Posts: 9 |
This is my first post and I apologize if I break any rules.
We have a DK424i (RCTUA PCB) system that (without going into much detail) lost it's configuration and I am having to reprogram. Everything seems to be working correctly except that my Program 81/87 (CO Line Station Ringing) isn't working correctly.
I have it programmed to ring all extensions immediately in both dan and night modes but the systems doesn't respond this way. It rings station 200 (only) in day mode and 201 (only) in night mode. I can verify that my Program 81/87 settings are correct but don't know what gives.
I have searched this forum but have yet to find an answer.
P.S. All Co lines appear on all extensions. Buttons flash red, however when there is an incoming CO line call (but no ringing).
Please help, I'm desperate.
Darrell
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 9
Member
|
|
Member
Joined: Jan 2005
Posts: 9 |
I have fixed the problem...
Apparenly you cannot use program 81/87 to program a port range and include port 000. Port 000 must be programmed seperately. You can however program ports 001-xxx as a range.
----------
Darrell
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
353
guests, and
64
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
