|
Joined: Oct 2004
Posts: 20
Member
|
OP
Member
Joined: Oct 2004
Posts: 20 |
Our office recently purchased an Amanda soho vm to go with our existing dk280. At first I couldn't get the dk to see Amanda( displayed "vacant"), and I realize why. Our incoming lines are coming into a pcou2, our processor is a rctub1 ( release 1, rrcs4 sub assembly ), and have peku's going to electronic phones. I figure I'll need a pstu to go to Amanda's analog ports, but I wanted to make sure there was nothing else I may need. This truly is a "bare-bones" system, so if all components are working properly will this be enough. Any help would be greatly appreciated.
scott epp
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
Member
Joined: Mar 2005
Posts: 406 |
The Amanda will need to be connected to an RSTU or PSTU it appears from your list you have everything else, just need to program
|
|
|
|
Joined: Oct 2004
Posts: 20
Member
|
OP
Member
Joined: Oct 2004
Posts: 20 |
That's what I figured but I'm still pretty new to Toshiba's so I thought I'd run it by the experts. Thanks a ton.
scott epp
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
92
guests, and
20
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|