|
|
Joined: Mar 2005
Posts: 20
Member
|
OP
Member
Joined: Mar 2005
Posts: 20 |
Is there anyway of paging over an IPQSIG network? I have a CTX670 on both ends.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Yes, dial the node id number plus the paging code. The only drawback is if you do an all call page to the phones, the volume is low.
It works well if your page is through an amplifier though.
|
|
|
|
|
Joined: Mar 2005
Posts: 20
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 20 |
I have tried dialing the network node which for us is 3 and then #30 for paging, but I get call abandonded. Any thoughts?
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
#30 is the all-call page code but there has to be at least one member in that group. Does #30 work at the node in question?
|
|
|
|
|
Joined: Mar 2005
Posts: 20
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 20 |
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
How about your node id? Can you dial 3 plus a valid extension in the target node?
|
|
|
|
|
Joined: Mar 2005
Posts: 20
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 20 |
Yes. I can reach any extensions by dialing 3 and an extension number. I can't however get an outside line by dialing 3,9,xxx-xxx-xxxx. It's very strange.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
119
guests, and
336
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
