sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems mute digital set

other then a push to mute handset and not using mic cutoff in h/f mode
anyone have a way to mute a handset say with a button
no options in 39

kenb
what is your application? my customrs us the mic cut-off button.
m

martin
i want to mute handset the mic cut off button
mutes in speaker phone mode or hf answer back
only customer request is mute handset
and the only way i see to do it is a mute button on the handset
ken

[This message has been edited by KENB (edited June 19, 2005).]

On the DK, if you press and hold the SPKR button while still on the handset, the handset will mute.

i will give it a shot
thanks

I know this is an older post, but this is my exact issue.

I have a ctx with the latest processor (i.e CIX), and I want to know if I can mute my DKT3000 handsets. I believe the 5000 series has the mute working on both the spkr and the handset (perhaps that's just the IP phones). But, can I mute my 3000 dkts?

Nope.

The 5000 series IPT's mute the handset when you press the mic key. Very nice feature, wish that worked on the other phones. :shrug:

That mute feature only works on software level that supports the DP 5000 series phones, so if you plug one of these into a CIX with sw 3.10 it won't work.

I would tell people to get a headset with a mute if really need it.

As I said, I have the latest processor.

In my tests with the mute mic button you can program onto a flex button - it doesn't do anything. It doesn't mute the handeset, and it doesn't mute the speakerphone. It does turn red when I press it though, and it can be turned on and off when I'm not using the phone. What does that button do?

I do however have some old bdku cards (digital phone cards) (I have several cards, some are pdkus). I'm not sure which card the phone I tested with was on - does it matter?