|
|
|
|
Joined: Oct 2005
Posts: 1
Member
|
|
Member
Joined: Oct 2005
Posts: 1 |
I've Installed a RPTU in cab.5 slot1. slot 2 is vacant. I've talked to a local tech. who says I have everything connected and programmed right.
The problem being my service provider can't see the D channel. I also don't get any light on thePRI card when connected or disconnected. The lights on the CSU light correctly when connected to the RPTU card. I have swapped cards and put card in known working slot but still can't get PRI to come up. Any ideas are welcome.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2005
Posts: 139
Member
|
|
Member
Joined: Jul 2005
Posts: 139 |
What system ? DK/CTX? If ctx, try to relocate the card to another slot (3?). Worked for me once.
- alfee -
|
|
|
|
|
Joined: Aug 2002
Posts: 4,934 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,934 Likes: 1 |
Cabinet5 slot 1 is a 8 channel slot you need to leave slot 2 and 3 open as there 8 channel slots also.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
I'm not meaning to fight with you but understand. In the 424 manual, it shows 51/52 and 57/58 as allowable slots for a PRI using RCTUE3/F4 with MBJU removed. Where do you find that you need slot 53 empty also, I see no reference and would like to understand.
Also, what is a MBJU and where do you remove it?
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: May 2004
Posts: 187
Member
|
|
Member
Joined: May 2004
Posts: 187 |
If you put a hard loop back towards PBX you should have PRI lights sync up, also you have to reset the card each time after you make any changes to the card. We have had trouble with PRI's on the DK, does work put some of the programs that toshiba provided was not all correct. do you have the list of program required. good luck.
|
|
|
|
Forums84
Topics94,532
Posts640,045
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (pvj, justbill),
256
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}
