|
|
|
|
Joined: Apr 2005
Posts: 110
Member
|
|
Member
Joined: Apr 2005
Posts: 110 |
I am working on a DK280 that currently has two lines up and running. I am adding two additional lines to the system. I have them plugged into the PEKU via the line cord. When I call the new number the LED's on the card flash for both lines respectively. When I try to access the lines via INT, #, 7003 and 7004, the system says LINE 3 Busy and LINE 4 Busy. What am I missing? I have also added the new trunks to the dial 9 group and also in program 81 to ring on all keysets. Any info will be greatly appreciated.
Thanks,
B
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2006
Posts: 114
Member
|
|
Member
Joined: Oct 2006
Posts: 114 |
check program 40 and 41 to make sure you have access to those lines.
Also I think you mean you have the lines plugged into the RCOU or PCOU since PEKU is an Electronic extension card.
The Rat
|
|
|
|
|
Joined: Apr 2005
Posts: 110
Member
|
|
Member
Joined: Apr 2005
Posts: 110 |
Sorry about the Peku mix up. Will check 40 and 41 and let you know.
Thanks,
|
|
|
|
|
Joined: Apr 2005
Posts: 110
Member
|
|
Member
Joined: Apr 2005
Posts: 110 |
Thanks wire rat, program 40 was the one I needed.
|
|
|
|
Forums84
Topics94,574
Posts640,227
Members49,876
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (dexman),
102
guests, and
70
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
