|
|
|
|
Joined: Dec 2005
Posts: 29
Member
|
|
Member
Joined: Dec 2005
Posts: 29 |
I just installed a DK280 that was pulled out from an old location with all phones working according to the customer. I followed, or tried to follow, the instructions for installing one of their DSS consoles and its not coming up. I hear digits being dialed from the DSS, but no lights are on it. Exactlly how is a phone associated with the console? Program 29 is a little confusing and I'm not having much luck. Any help would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
1- Make sure that the attendant phone and dss are on the same card i.e port 000=200 and port 007 =dss .
2- That card should be code 64 in prog 03. Any changes in 03 requries simulated or true off/on.
3- Then program #29 to assign buttons to dss
program spkr -1 for dss # 1 and 1 for first
group of buttons on dss,Think of the dss as 3- 20 button sets group 1-2-3 and your putting buttons on them ,just like in prog 39
|
|
|
|
|
Joined: Dec 2005
Posts: 29
Member
|
|
Member
Joined: Dec 2005
Posts: 29 |
Thanks, I'm going to give it another try.
|
|
|
|
Forums84
Topics94,515
Posts639,967
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
286
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
