sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems scrolling through system speed dials on CIX 100

is there a way to scroll through the system speed dials on the CIX 100 with latest software release. On a 3020SD set i go to programming mode int#9876 and then hit speed dial button and then 200 for example to bring up the system speed dial for 200. Is it possible to scroll to the next speed dial to see the rest of the numbers that have been programmed.
Thanks in advance for any help.

With eManager, Go into Station-Assignment-DKT-Enable FK34. This will give admin rights to your phone.
On your phone (softkeys)
Press Mode
Press Dir
Press Extr
Enter name or press find

You will see and be able to scroll through the names. Unfortunatly, the only way to scroll through the speed dials and be able to see the numbers is with the 3x14-SDL

You don't need to enable FK34 to use the softkeys for speed dial listing. If you have release 4 software, it's there by default on the 3X00 series phones with displays and IPTs.