|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
sound like the phone is forwarded to x-211
*71-*73 would be for internal ringing, 81-81 is for CO's ringing or external
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2007
Posts: 11
Member
|
|
Member
Joined: Apr 2007
Posts: 11 |
Right now u call x210, x210 flashes a red light, but doesnt ring and the x210 pickup button rings on x211.
The way that it should be is u call x210, both x210 and the x210 pickup button on x211 ring.
A few people have mentioned *81, my question is how to use this command from the phone that I have plugged in port 005?
|
|
|
|
|
Joined: Sep 2006
Posts: 99
Member
|
|
Member
Joined: Sep 2006
Posts: 99 |
Would suggest PM a Mod. to get the programming proceedure that you are requesting.
As Steve and I have stated , Program 71-73 are internal ringing and program 81-89 are external ringing that can be checked. We can not give passwords for programming over an open forum.
As the great Bob once said, "Its a SWITCH its either OFF or its ON!"
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
I would check program *71 and make sure that LED 11 is lit for port 10.
|
|
|
|
|
Joined: Apr 2007
Posts: 11
Member
|
|
Member
Joined: Apr 2007
Posts: 11 |
Well I found a programing manual and started poking around, but still no luck.
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
Ditto phonemeister
Sounds like primary ext at 210 programmed not to ring and secondary ext of 210 at set 211 programmed to ring. Prog. *71
|
|
|
|
|
Joined: Apr 2007
Posts: 11
Member
|
|
Member
Joined: Apr 2007
Posts: 11 |
Thats exactly my problem Breed, I have 2 questions about *71,
Once I'm in the command, would the "port reference #" that should ring be the the ext 210 or the actual port which seems to be 010?
After that it asks for an EK Button, do I press this on the phone I'm physically programing on, or on x210.
Thanks for the help, I think I'm almost there!!
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Like I said, light up LED 11 for port 10 in program *71. LED 11 is the bottom-right button on a 20-button phone. The "port reference #" is 010 not 210.
|
|
|
|
|
Joined: Apr 2007
Posts: 11
Member
|
|
Member
Joined: Apr 2007
Posts: 11 |
Ok, do I have to program from a 20 button phone?
I have 2 phones in our server room, a 20 button-titled "master" and a 10 button plugged into port 005-I was told it has to be plugged into port 005 to program.
ext 210 is currently using a 20 button phone.
|
|
|
|
|
Joined: Sep 2006
Posts: 99
Member
|
|
Member
Joined: Sep 2006
Posts: 99 |
Use a 20 button phone in port 005. Program *71 to immediate ring internal, light led 11 which as stated is the bottom right (dn) button on your 20 button phone. If the button is not already on,, press it and the LED will come on. IF its already on you need to go deeper with your problem.
As the great Bob once said, "Its a SWITCH its either OFF or its ON!"
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
249
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
