|
|
|
|
Joined: May 2008
Posts: 3
Member
|
|
Member
Joined: May 2008
Posts: 3 |
Is it possible to configure the DK424 4.0 for NFAS on the PRI interface?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Yes but only 2 circuits sharing a d channel. Recommend 4.3 software if possible.
|
|
|
|
|
Joined: May 2008
Posts: 3
Member
|
|
Member
Joined: May 2008
Posts: 3 |
I am having on of those crisis moments. Were moving our home office this weekend. the circuit was ordered with NFAS not NI-2. Were being told this is not a compatable protocol by our local Toshiba dealer. any suggestions as to who we could turn to for getting this going?
|
|
|
|
|
Joined: Jul 2006
Posts: 728
Member
|
|
Member
Joined: Jul 2006
Posts: 728 |
They are saying its incompatible because more than likly they dont know NFAS is. I would bite the bullet and get NI-2 as quickly as possible.
|
|
|
|
|
Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033 |
Originally posted by TadiranTechTexas:
They are saying its incompatible because more than likly they dont know NFAS is. I would bite the bullet and get NI-2 as quickly as possible. ^^^x2 See if they can re-order the ckt's asap! You're setting up future service calls if your current dealer is claiming it isn't compatible. In the same sense... they should be able to program it. BTW, (just curious) any reason for ordering that?
- Tony Ohio Data LLC Phone systems, data networks, firewalls and servers in Central Ohio. Some people aren't used to an environment where excellence is expected.
|
|
|
|
|
Joined: May 2008
Posts: 3
Member
|
|
Member
Joined: May 2008
Posts: 3 |
will this switch handle 4ess?
|
|
|
|
|
Joined: Jul 2006
Posts: 728
Member
|
|
Member
Joined: Jul 2006
Posts: 728 |
4ess is just the CO switch that is handling your circuit. 4ess's are are and were used mainly for LD with AT&T.
As long as you can get NI-2 from the carrier you should be good to go.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
So, have them come out and program the DK for NFAS so long as you have only 2 circuits per NFAS assignment. Will it handle a 4ess switch? I don't see why not if it supports NI-2 like you had mentioned earlier.
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
277
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
