Phone Systems

AtcomCloud Online Store
Previous Thread
Next Thread
Print Thread
Rate Thread
#195414 11/11/08 05:19 PM
Joined: Dec 2006
Posts: 63
Member
OP Offline
Member
Joined: Dec 2006
Posts: 63
Hi. Can night ring over page be programmed in a CTX 100 without the paging card? Or can I progrm the relay contact to follow the ringing? Thanks.

Atcom VoIP Demo
VoIP Demo
#195415 11/11/08 06:45 PM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
You can use the Page Industries adapter https://www.pageindustries.net/e-commerce-solutions-catalog3.5.html

You don't need the Paging card, just a station port. I've used them often.


THE Bracha, old blond specialist in Rube Goldberg solutions.
#195416 11/11/08 06:48 PM
Joined: Jun 2005
Posts: 2,642
Likes: 4
Member
Online Content
Member
Joined: Jun 2005
Posts: 2,642
Likes: 4
You can DIT the trunks to the external paging output. The processor has a built-in page output.

The problem is that the calls will never go to voicemail. The phones should ring if they have line appearances and the lines are ser to ringing.

#195417 11/11/08 08:46 PM
Joined: Jun 2005
Posts: 2,642
Likes: 4
Member
Online Content
Member
Joined: Jun 2005
Posts: 2,642
Likes: 4
Ya, those PI adaptors work good when you need to to go to voicemail.

#195418 11/11/08 08:52 PM
Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
Offline
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033
Well, I can't add anything else, except agreement. Good suggestions ObhhB and newtecky.

As for the original poster... do you need a relay contact along with the night ringing, or do you only need night ring alone?


- Tony
Ohio Data LLC
Phone systems, data networks, firewalls and servers in Central Ohio.
Some people aren't used to an environment where excellence is expected.
#195419 11/12/08 05:26 PM
Joined: Nov 2008
Posts: 7
Member
Offline
Member
Joined: Nov 2008
Posts: 7
I only need the night ring over page. The relay contact was to enable me to use an old Wheelock ringer the customer has hanging on a wall if the page didn't work.

#195420 11/12/08 06:03 PM
Joined: Dec 2006
Posts: 63
Member
OP Offline
Member
Joined: Dec 2006
Posts: 63
strange, my last post came through as another tech on our network. either he never logged off or I interrupted his session. opps

#195421 11/12/08 06:44 PM
Joined: Jun 2005
Posts: 2,642
Likes: 4
Member
Online Content
Member
Joined: Jun 2005
Posts: 2,642
Likes: 4
Like I said earlier, if you DIT the trunks to the paging output, it will ring over your paging system.

If you set it to Night bell, the contacts should close on the ringing cycle. I have never used it, but per the manual, the contacts will close for 1 sec, then open for 3 sec. If you had a bell wired thru the contacks it should cause it to ring, as long as it rings by shorting the contacts.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,681
Posts636,146
Members49,602
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Laura Figueroa, mark dagg
Newest Members
Dialtony, FatherLot, RFarrarMD, WTCI, Sundance Nailor
49,601 Registered Users
Top Posters(30 Days)
dexman 11
Toner 11
Yoda 10
Who's Online Now
0 members (), 32 guests, and 23 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5