sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems CIX100 & LIPU & IPT-2010-SD

All right, I plugged in a pair of IPTs directly into a switch that is plugged directly into the LIPU. Now, there is audio between both IPTs but when I try to dial out, or dial an extension of one of the analog phones here there's no audio. The extension rings, but when you answer- there's no audio.

So, it looks like theres some kind of issue when the audio is being sent from the LIPU to the BWDKU1A.

Any ideas? I appreciate the help.

Ok I went ahead and took a couple of screenies, one of the LIPU config and one of the IPT config. Maybe this will help? I've tried both audio codecs and I've tried the enable/disable peer to peer and still no luck.





Any Idea?

In prog 250 FB16 change to enable and try it.

Whenever we try to chage Prog 161 FB11 or FB12 we get an error.

Leave them at default. Did you do what Phonemeister said?

It seems to me that he has tried the FB16 stated in the post where he submitted the screen shots.

You can always use Wireshark to try and troubleshoot speech paths. Have you rebooted the system?

That "dbget" error screams of something corrupt in programming. Could be worth deleting and re-assigning the LIPU card and extensions.

I would love to delete it and re-try...

Can you tell me how please

And, yes we tried to re-boot the system.

also, Do you think that FB11 and/or Fb12 can be causing us to have no audio?

you can try program 150 (system ip data)

at the bottom select 'get default' than 'submit'

see if that helps