sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Adding a line to a Strata D40i

Hello folks
I have a client with a Strata D40i with three lines currently on the system.
He has requested that I install a VoIP service for long distance capabilities on line 4.
How do I add dial tone to the system and "liven up" a button on all phone sets for this additional "Line 4"?
Any help is greatly appreciated
Regards,
Dan

Wire the line to the TCOU then go to prog 39 and add line 4 to the sets.

and 81-87 for ringing

and check P40 to make sure they can access line 4 from all the handsets.
might be a good idea to check if they are using LCR as well.

Hello
I have entered the programming code in but it doesnt seem to be working for me.
I have the the dial tone from the magic jack coming to CO4 and I input the Prog 39 then it asks for a port number, #, then it asks to Press LED Button to be defined and then asks for a code?
When I input Port 004 and then press the button I want the line to appear on and then the code "004" (according to the chart in the manuel) if I am reading it right.
What am I missiing or not doing
Any help would be appreciated - this is my first Toshiba work order so...... pateince is needed
!!!!
Thanks
Dan

Edited to conform to board regulations.