|
|
|
|
Joined: Apr 2010
Posts: 37
Member
|
|
Member
Joined: Apr 2010
Posts: 37 |
How would I configure ISDN Call by Call in eManager to set a single PRI to use an ILG set to CO and an OLG set to TIE?
If I try to just set this in program 302, it gives me an error that "The type of ILG or OLG entered is not ISDN", but from what I've been reading, it sounds like I could use Call-by-Call to do this. Correct?
Mark
Sr. Systems Administrator
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 1,314
Member
|
|
Member
Joined: Feb 2007
Posts: 1,314 |
What are you trying to do? It seems that you are trying to route your outbound calls over a TIE line to a different system and then out from there? Call-by-Call is more for using a single PRI for multiple facilities. If you want your outbound calls to route over a different circuit, use LCR.
|
|
|
|
Forums84
Topics94,545
Posts640,078
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
197
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
