|
|
Joined: Jun 2011
Posts: 13
Member
|
OP
Member
Joined: Jun 2011
Posts: 13 |
Hi guys,
I am installing a CIX670 with an expansion cabinet for a customer. Trouble is the cable that should have came with the 2 cabinets didn't come with. I cant find one anywhere online and Toshiba says its a non orderable part. I'm using a new cabinet and a cabinet I had here at the shop.
Does anyone know what the part number might be? If there is a universal cable I can use? Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
It should be folded up inside the expansion cabinet. Not to say it couldn't be there but I was fooled once so you might look VERY carefully on the side panel as I removed a plate once and there it was.
I'll look on the two 19 inch rack mount expansion cabinets that I haven't been able to sell to anyone for years and see, I thought they were attached on one end, maybe that is why they are not a part you can purchase.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Jun 2011
Posts: 13
Member
|
|
OP
Member
Joined: Jun 2011
Posts: 13 |
Thanks! I did look over both units very well, and I didn't see it. But I will look again.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
I'm looking at a picture of the CIX Install/Maintain 2007.pdf and it shows the cable behind a door.
Drawing says: Data Cable Door (shown open) and it is right under where the cables plug into the base cabinet. The label says: CAB 2, CAB 3, CAB 4, etc.
Reminds me of the song, "Whats behind the green door."
Look inside the metal directly under where you plug in the Data Cables. 99.999% sure you have them.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
Was the expansion cabinet new as sometimes when engineers take out a system they don't realise the cables stay attached to the expansion cabinets and not the base cabinet.
Regards
Carl
|
|
|
|
|
Joined: Dec 2011
Posts: 82
Member
|
|
Member
Joined: Dec 2011
Posts: 82 |
is the cable the same from a DK280 as ive got a rack mounted cix but the cable was cut
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Nope, the cable from the DK won't work with the CIX.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
