web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#206813 05/16/12 01:55 PM
Joined: May 2012
Posts: 14
Member
OP Offline
Member
Joined: May 2012
Posts: 14
I have a CTX-100 with an ACTU3A processor. I am attempting to make some programming changes using the onboard NIC with WinAdmin. I have my laptop set with a static IP of 192.168.254.252. I have verified the ACTU3A IP address thru a tele set via operation 916 as 192.168.254.253. I am able to establish a link, and ping the .253 address, but when I try to use WinAdmin it can't get there. I have used WinAdmin on other CTX-100s with no problem. Anyone have any ideas? Thanks.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#206814 05/16/12 02:52 PM
Joined: Dec 2006
Posts: 810
Member
Offline
Member
Joined: Dec 2006
Posts: 810
Try a system reboot.


Pat Austin
Teleco Inc.
Product Manager/Sales Engineer
Adtran ATSP
TCTE/CTP Certified

Teleco Homepage
#206815 05/16/12 06:51 PM
Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
If this is an ACTU3A and you really are using WinAdmin, then stop using WinAdmin. You need the proper version of (N)eManager.

#206816 05/17/12 03:54 AM
Joined: May 2012
Posts: 14
Member
OP Offline
Member
Joined: May 2012
Posts: 14
Thanks Pat and Phonemeister. I have tried a hard reboot (power cycle) with no effect.
Apparently in the past I have used WinAdmin on CTX-100s, but the processors must have been an ACTU02A. How would I determine what version of eManager to use? I believe I have v5?

#206817 05/17/12 10:05 AM
Joined: Jun 2005
Posts: 2,702
Likes: 7
Member
Offline
Member
Joined: Jun 2005
Posts: 2,702
Likes: 7
WinAdmin worked up to version 2.22, then they developed emanager.

An ACTU2A processor will have either 2.XX up to version 3.10. I think version 1.X was on the older ACTU1A processors.

An ACTU3A processor started with version 4.00 up to the latest version 5.20.

Emanager is backwards compatable with older versions (although I have had some issues with real old 1.0X versions), so if you have emanager version 5, you would be ok in most cases. You could have issues if the processor level is higher then the emanager version.

#206818 05/18/12 08:51 AM
Joined: May 2012
Posts: 14
Member
OP Offline
Member
Joined: May 2012
Posts: 14
Thanks David, I have upgraded to eManager v5 and will be giving it a try.

#206819 05/20/12 08:34 AM
Joined: Mar 2009
Posts: 393
Member
Offline
Member
Joined: Mar 2009
Posts: 393
I'm having the same issue. Had a donated CTX100 and can't seem to get on it either. I got the IP from the phone as 192.168.254.253 I can ping it although I DO get some packet loss. The emanager says it is not responding

It has an ACTU1A V2. I am using emanager 3.10A19.

#206820 05/20/12 11:14 AM
Joined: Jun 2005
Posts: 2,702
Likes: 7
Member
Offline
Member
Joined: Jun 2005
Posts: 2,702
Likes: 7
Quote
Originally posted by Not_sirius:
I'm having the same issue. Had a donated CTX100 and can't seem to get on it either. I got the IP from the phone as 192.168.254.253 I can ping it although I DO get some packet loss. The emanager says it is not responding

It has an ACTU1A V2. I am using emanager 3.10A19.
I have had issues with older ACTU1A processors with the addon AETS NIC.

On one of them, I upgraded the firmware and was able to connect. On another, we continued to have problems even after upgrading. Packet loss when connected directly could indicated problems with the NIC.

#206821 05/20/12 07:13 PM
Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
You may have to manually set your NIC's speed to 10 mb/s as the AETS does not do fast ethernet speed.

#206822 05/21/12 10:03 AM
Joined: Mar 2009
Posts: 393
Member
Offline
Member
Joined: Mar 2009
Posts: 393
I set my NIC to 10 full and half. I can still ping .253 but now it says no response from device. When it WAS connecting it kept looking for a non existent SES on IP .252. I scanned and There is no .252 connected. I removed the ntry from the profile but it keeps looking for it anyway.

Page 1 of 2 1 2

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
teleco 4
Who's Online Now
1 members (nonameyet), 110 guests, and 222 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5