|
|
|
|
Joined: Mar 2008
Posts: 166
Member
|
|
Member
Joined: Mar 2008
Posts: 166 |
I have a 2010s phone with a 20 button attached DSS on port 000. When I try to program the keys on the DSS, it modifies the 20 button DSS attached to port 002. Its like the two are tied together. Programming either one changes the other.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
ADM programming is program *29 (on the older DK)
|
|
|
|
|
Joined: Mar 2008
Posts: 166
Member
|
|
Member
Joined: Mar 2008
Posts: 166 |
Yes, problem is when I program 1, it changes the other
|
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
If you only have one add on, just * out all the keys on the second.
Also, it will only allow a dss for a station to appear on one key, so if #005 was on key 5 of the second module, and you put #005 on the 1st, it would blank the key on the second.
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Verify in prog. 04 that you are programing the correct port.
|
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
299
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
