|
|
Joined: Oct 2004
Posts: 2
Member
|
OP
Member
Joined: Oct 2004
Posts: 2 |
Upon firing up system, Station Ports - Extensions #14 & #15 will not activate.
Don't have programming manual or LCD set - any way to get Stations #14 & up fired up. ??
Where can I get "User Guides" and Install manual for this system??
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Check the wiring polarity as they are pair 5-6, move the sets to a good port to make sure the sets are good. If all is good then you may have bad ports as they should come up.
|
|
|
|
|
Joined: Oct 2004
Posts: 2
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 2 |
Thanks for the info - checked 14 & 15 out on the 66block from KSU with station side removed - nothing at this point either, but, I did not check beyond Sta 15 - Again, thank you.... <font face="Verdana, Arial" size="2">Originally posted by dtmf:
Check the wiring polarity as they are pair 5-6, move the sets to a good port to make sure the sets are good. If all is good then you may have bad ports as they should come up.</font>
|
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
|
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
Tom:
You might also try reseating the amphenol connector. It's worth a try.
For user guides & manuals--check the "Manuals" link on this website. Good luck ---
also---if you can get an LCD--it would make the programming and testing of the system a lot easier. Click on the "Equipment" link on this website.
[This message has been edited by JWRacedog (edited October 19, 2004).]
|
|
|
|
Forums84
Topics93,883
Posts637,025
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Touch Tone Tommy),
95
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
