web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
#209107 09/26/05 01:52 AM
Joined: Oct 2004
Posts: 1,492
Member
*****
Member
*****
Joined: Oct 2004
Posts: 1,492
in term programming right befor the password prompt what rev of software are you running?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#209108 09/26/05 03:29 AM
Joined: Apr 2005
Posts: 41
Member
Member
Offline
Joined: Apr 2005
Posts: 41
Eng. V2.00 p04-2FE3

Do you happen to know the default password for WinDBA? I saw in the help section of WinDBA that there is a spot for VMID when programming the overflow for UCD groups. I'm wondering if I have to do it through that interface rather than on the 30 button (Although the 2.00 manual says it should work).

#209109 09/26/05 03:38 AM
Joined: Apr 2005
Posts: 41
Member
Member
Offline
Joined: Apr 2005
Posts: 41
I'm also wondering if maybe using a database from a 1.0 system on a 2.0 system is causing the issue with the missing features. Unfortunately I can't shut it down to test it out during business hours.

#209110 09/26/05 07:05 AM
Joined: Apr 2005
Posts: 41
Member
Member
Offline
Joined: Apr 2005
Posts: 41
So it turns out I needed to download the DB to WinDBA for it to convert to a 2.0 DB. I tried doing this by "Downloading from File" using my 1.0 backup. I selected that it was an FP1 DB and then I "Uploaded to File". I used this uploaded file to upload through HyperTerm.

Still doesn't to work.

#209111 09/26/05 11:36 AM
Joined: Apr 2005
Posts: 41
Member
Member
Offline
Joined: Apr 2005
Posts: 41
Another piece to the puzzle. Apparently the XTSc is a little different than the XTS in programming. They told me you must default the system at the same time you toggle the PMU. (Which solved the looping term issue)

Page 2 of 2 1 2

Moderated by  EV607797, MnDave, nfcphoneman 

Link Copied to Clipboard
Newest Topics
Inter-tel Encore CX aka Mitel 3000 circa 2008
by Telesystems - 04/27/25 02:20 PM
Just a little of what I've been working on
by John807 - 04/25/25 11:42 AM
Vertical sbx
by Gary S. - 04/25/25 09:59 AM
NEC SV9100 trunk to trunk routing
by utec - 04/21/25 04:23 PM
Forum Statistics
Forums84
Topics94,521
Posts639,995
Members49,850
Most Online5,661
May 23rd, 2018
Newest Members
ferhat_efe, utec, MoverDub, Kevin usama, Pruitt roger
49,850 Registered Users
Top Posters(30 Days)
Toner 8
Taddeo 6
Who's Online Now
2 members (Gary S., justbill), 228 guests, and 43 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0