Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
OK, Could you tell me where to find LCR in the programming. I have very little experience with the Vodavi system. My limits are that I know how to get into the Admin programming and I know everything is Flash _ _ then button 1 - 24. that is about the extent of what I know.
Get a manual and maybe some one on one tech support. LCR programing can be a pain, but since you have some of the lines programed properly it shouldn't be too much of a leap to get them all the same.
Well I've tried two things: Flash 80, Button 7 initalize the entire LCR and the Flash 05, button 7, zero, hold, to turn it off. Neither worked. Still no caller ID outgoing on lines 9, 10, & 11. Caller ID shows up on my cell when I dial from lines 9, 10, & 11 on the block before the system. Any other ideas?
To simply disable LCR and then turn it back on: No, you do not have to power cycle the system. You will certainly not hurt anything if you do cycle the power, however since you defaulted the LCR programming, this feature won't come back working properly, so you should just leave LCR disabled in flash 05 now.
