|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
|
Member
Joined: Dec 2001
Posts: 352 |
I am in the middle of a Dynamic PRI install with an XTS. The customer had a regular digital PRI from AT&T which worked just fine. The new CO provider has a dynamic PRI which basically emulates a PRI. They locate an Adtran 904 at the customer site to separate the voice and data streams. We do have some dynamic PRI's out there with another provider that work just fine.
Basically when a NO ANI call comes into the switch, it does not route the DID to the proper extension. It routes it to the operator.
Has anyone else come across soft switch signaling problem like this? If so, did you get a resolution with co provider or Vertical?
Vertical's response was they had a bulletin back from 2007 stating that they don't support soft switches if problems occur. They give a couple of token parameter changes but they don't resolve the situation
Tip and ring, the work of the devil!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,492
Member
|
|
Member
Joined: Oct 2004
Posts: 1,492 |
I thought they put some to firmware on the newer PRI cards that had fixed a pile of issues that they were having with soft switch's?!!
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
135
guests, and
45
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
