|
|
Joined: Mar 2009
Posts: 61
Member
|
|
Member
Joined: Mar 2009
Posts: 61 |
I have a bunch of xts systems I maintain, and I was wondering as the 9015 phones get harder to come by, is it possible to swap out the 9015's for the newer 3015 phones?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 195 Likes: 3
Member
|
|
Member
Joined: Jan 2008
Posts: 195 Likes: 3 |
They will work fine. Can't remember what software version you will need, but most likely you have it because of DST fix.
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
The XTS have to have fp2 software to use the 3015 phones.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
I believe the distribution side FP1.2 was actually the first release to support the "Uni-phones". Whether the dealer side had the identical FP then, I'm not sure. However, I would require the customer to upgrade to FP2.23 (The highest release that the older revision MPBs will run). There are too many limitations on older versions and the 2.23 enhancements are well worth it.
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
|
Joined: Mar 2009
Posts: 61
Member
|
|
Member
Joined: Mar 2009
Posts: 61 |
ok my version is 2.00-2fe3, but the 3015 phones only get to the ok sync and no further
|
|
|
|
|
Joined: Jan 2005
Posts: 15,399 Likes: 18
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,399 Likes: 18 |
The XTS in my office still has 1.16 in it and we are using a mix of 3015 and 3016 phones. We also have quite a few IN9015 phones on it as well.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Mar 2009
Posts: 61
Member
|
|
Member
Joined: Mar 2009
Posts: 61 |
yeah thats what im tryin to do, the switch is running a bunch of 9015 but instead of tracking those down i figured for the phones i have to added i would put in the newer 3015
|
|
|
|
|
Joined: Dec 2005
Posts: 651 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 651 Likes: 1 |
You might check to see if station lock is on ( fl 06 butt. 8. Also, fl. 50 page b, butt. 1 to assign the phone type. I actually thought the XTS (any version) would work with the 30 button phones.
"I thought I was wrong once, but I was mistaken"
|
|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
Turn off station lock. It is found in Flash 06. After the 3015 phones are recognized, you will need to turn station lock back on. When changing station types, all the settings will default to factory and the phone will need to be reprogrammed to your needs.
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
|
Joined: Mar 2009
Posts: 61
Member
|
|
Member
Joined: Mar 2009
Posts: 61 |
i did a quick system reset and the phones have came up, but i too thought the phones could interchange because i tested this in my shop and it worked then on site it didnt, but at the shop i didnt have to do a reset i just unplugged and plugged in the other and it switched phone type and worked fine
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
