|
|
Joined: Mar 2009
Posts: 37
Member
|
Member
Joined: Mar 2009
Posts: 37 |
Customer is running 2 companys on 1 system. Company A is using channel 1. Would like to use a CO port for company B. Manual indicates you need a 24V pwr supply and capacitors and resistors. Has anyone attempted this, if so what is the recipe to make it work? The maunual is vague. Where does the capacitors go and how do you prevent the pwr sup backfeeding into the output of the music source. Company B has 2 lines.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
If you look under MOH assignments, there is a diagram in the manual showing the proper connections. Connect 680ohm/1w resistors between each power supply lead and the CO input. Then connect the music output to the same CO input but first insert two 10uF/50v capacitors in series with one of the music leads.
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
Member
Joined: Mar 2009
Posts: 37 |
Thanks Dave the capacitors were throwing me off will try out appreciate the help will post outcome.
|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
Member
Joined: Mar 2009
Posts: 37 |
Tested worked like a charm!Thanks for the info Dave.
|
|
|
Forums84
Topics94,509
Posts639,920
Members49,843
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|