I have displays that quit working. I have unplugged the ribbon, plugged it back in and it works, some go out soon after again. Have others noticed this and if so what are you having success with.
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
I have the same problem and I think it may be a result of high humity, unplug the ribon cable from the main pc board and rub a little wd-40 on it before you plug it back in.
there is a jack labled ADP under the telephones, the black and yellow of the station cord feed out through the center two pins of the jack. If you wanted to hook a DSS or other two conductor device through the phone and just use one cord you would hook the secondary device to the yel/blk wires in the phone jack and plug the secondary unit into the ADP jack in the bottom of the phone.