|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
OP
Member
Joined: Apr 2005
Posts: 26 |
Can anyone tell me how to switch a trunk from Ground start to loop start? I have read the manual cover to cover and all that I can find is that the system assigns the trunk ground start by default. Any help? :shrug:
"It's NOT my fault!"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 19
Member
|
|
Member
Joined: Aug 2005
Posts: 19 |
You change it using Manager E, and go to the lines and networking area. Hopefully you are familiar with this, if not you are going to have problems. Loop start lines are not the recommended trunk type, the system will not get a good disconnect from the CO and your channels may lock up. If you add an ANI card that just makes the db loss and problems possibly worse. If its a true loop start line from Verizon and not a channel bank CO you will have much better sucess.
|
|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 26 |
Thank you very much, worked like a charm! All the other lines were ground start and the customer ordered their own lines Loop start.Go figure!
"It's NOT my fault!"
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Bob3470),
173
guests, and
332
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
