Using Computer to Program Win 440ct

Print Thread

Rate Thread

Using Computer to Program Win 440ct #223272 11/08/06 03:18 AM
Joined: May 2001 Posts: 15 Oklahoma City Ray @ One Call Member
Ray @ One Call Member Joined: May 2001 Posts: 15 Oklahoma City	We are having a problem using a laptop to get into a Win 440CT. We used Procomm and Hyper Terminal with a straight through serial cable, but we could not get system to respond. Any recommendations on what I can try? Or am I using the right equipment or software? Does Win have their own software, if so, do you know where I might find it. Any help is appreciated. Thanks Ray

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Using Computer to Program Win 440ct #223273 01/31/07 08:15 AM
Joined: Dec 2001 Posts: 99 Nashville, TN, USA 392 Member
392 Member Joined: Dec 2001 Posts: 99 Nashville, TN, USA	Better late than never: straight through modem cable (DB9 to DB25), 19200 baud, N,8,1, VT100 emulation. If you hit enter and don't get a password prompt, step down to 9600, then 4800, 2400, 1200, 300 to see if someone set the dipswitches wrong. If no response, your cable, serial port or software is faulty.

Re: Using Computer to Program Win 440ct #223274 02/01/07 03:16 AM
Joined: May 2001 Posts: 15 Oklahoma City Ray @ One Call Member
Ray @ One Call Member Joined: May 2001 Posts: 15 Oklahoma City	thanks for the info.

Re: Using Computer to Program Win 440ct #223275 02/02/07 06:50 PM
Joined: Feb 2007 Posts: 14 USA DECT4all Member
DECT4all Member Joined: Feb 2007 Posts: 14 USA	PM Sent!

Moderated by metelcom

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Other TDM Phone Systems Other Telephones & Systems Using Computer to Program Win 440ct