|
|
Joined: Sep 2006
Posts: 99
Member
|
Member
Joined: Sep 2006
Posts: 99 |
I can't seem to get a station to forward on RNA,Busy, to a Phantom that is programed on that phone and then on to PhoneMail. With the Hicom 300, There is no issue like this.
FYI: ext.-xxxx is mulap and physical port ext.-xxxx is mulap and virtual port
Both extension on same phone.
Target one is * (called station) Target two is **xxxx (virtual extension) Target three is xxxx (phonemail)
Can this be done with a virtual port? Originally both extension were at the main site and now via cornet routed to second site. Both have been published and get calls. So if some one called ext. xxxx(virtual port) it would roll to pubished DID physical port extension and on to phonemail and vise versa.
Might be over thinking this. =)
Any idea on how to make it work would be great.
Thanks
As the great Bob once said, "Its a SWITCH its either OFF or its ON!"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2009
Posts: 8
Member
|
Member
Joined: May 2009
Posts: 8 |
Try typing an actual station number for the first target and see if the calls eventually go to the mailbox of that called extension.
I think it is something with the * not working when a virtual is used. I may be and am very likely to be wrong.
|
|
|
|
Joined: Sep 2006
Posts: 99
Member
|
Member
Joined: Sep 2006
Posts: 99 |
I tried using the extension and no luck.
As the great Bob once said, "Its a SWITCH its either OFF or its ON!"
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
98
guests, and
35
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|