sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems DS1000 VM and Call Coverage

I need a good solution for a car salesman who has a multiline on his desk and who wants a cordless when hes out in the lot. The problem I see is with vm. If hes at his desk the multiline needs to ring and go to vm. If hes outside I need the cordless to ring and go to same vm. Im planning on using analog cordless. I know if I used the new digital cordless I could put call coverage on it but Im trying to save some cost. I dont believe that call coverage can be assigned to analog. I know I could reverse it and have call coverage of the analog on the multiline and use a message center key for vm but then I lose intercom features at the multiline, right? I dont want the other employees to have to call two different ext to reach this guy. Call forward doesnt seem to be the answer because according to the manual the caller will end up in the cordless mailbox not the originally called multiline box. I just had a thought: could I copy the messages back into the multiline box? I dont think there is a copy feature but couldnt I create a CR mailbox that would timeout to the multiline box? Am I making this too complicated? Thanks!

install the new nec cordless phone made for the ds systems and your problem will be solved.

works great, but be aware its only 900 mhz...

Just use group mailbox feature if you are using intramail v1.2 and ds system v3.21.00

[This message has been edited by clgjr (edited January 27, 2005).]

Thanks guys. I checked out the new features and found several things that helped me out!

Make sure you get 03.21.02 or the Intramail may lock up

~Don~

Is 3.21.02 available off the NEC website?

YUP!

------------------
| Telephone Systems | Voice & Data Cabling

Nope

You have to get it form NEC only 3.21.00 is on the site

~don~